Safety Notes - Fujitsu SCALEOVIEW C17-7 User Manual

i User's Guide

Safety notes

This device complies with the relevant safety regulations for data processing equipment,
including electronic office machines for use in an office environment. If you have any
questions, contact your sales outlet or our help desk.
•
The display surface of the LCD monitor is sensitive to pressure and scratches. You should
therefore be careful with the display surface so as to avoid lasting damage (Newton rings,
scratches).
•
If the device is brought into the installation site from a cold environment, condensation can
form. Before operating the device, wait until it is absolutely dry and has reached
approximately the same temperature as the installation site.
•
To ensure sufficient ventilation, the intake and exhaust air openings of the monitor must
never be blocked.
•
The monitor automatically sets itself to a mains voltage in the range of 100 V to 240 V.
Ensure that the local mains voltage lies within these limits.
•
Ensure that the power socket on the device or the grounded mains outlet is freely
accessible.
•
The ON/OFF switch does not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the socket.
•
The monitor is equipped with a power cable that complies with safety standards.
•
No data transfer cables should be connected or disconnected during a thunderstorm.
•
Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the
device (danger of electric shock, short circuit).
•
The device is not waterproof! Never immerse the device in water and protect it from spray
water (rain, sea water).
•
In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign
matter), switch off the unit, disconnect the power plug and contact your sales outlet or our
help desk.
•
The monitor must be disposed of in accordance with the local regulations for disposal of
special waste. The screen background lighting contains mercury. You must observe the
applicable handling and disposal safety regulations for fluorescent tubes.
•
Only qualified technicians should repair the device. Unauthorised opening and incorrect
repair may greatly endanger the user (electric shock, fire risk).
•
Use a screen saver with moving images and activate the power management for your
monitor to prevent still images from "burning in".
•
Store this manual close to the device. If you pass the device on to third parties, you should
pass this manual on with it.
Downloaded from ManualMonitor.com Manuals