Operation Check With Serato Dj - Pioneer DDJ-SX2 Service Manual

1

5.2 OPERATION CHECK WITH Serato DJ

[Installation of Serato DJ]
A
A brief explanation of how to install Serato DJ on a PC is given below. For details, refer to the operating instructions of the
software.
If the OS of the PC to be used is Windows, install the driver software that enables audio output from the PC beforehand.
The operating environment of the PC required for installation of Serato DJ is shown below.
B
For the latest version of the Serato DJ software, access Serato.com and download the software from there.
C
For downloading, registration of a user account at "Serato.com" is required.
Unzip the downloaded file, then double-click the unzipped file to launch the installer.
Read the terms of the license agreement carefully, and if you agree, select [I agree to the license terms and conditions],
then click [Install].
After installation is completed, the Installation Completed screen will be displayed. Click on [Close] to terminate the Serato DJ
installer.
[Operating procedures]
1
D
Connect headphones to one of the
2
Connect powered speakers, a power amplifier,
components, etc., to the
OUT 2] terminals.
3
Connect this unit to your computer via a
4 Turn on the computer' s power.
5
Connect the AC adapter.
6
Press the [STANDBY/ON] switch
panel to turn this unit' s power on.
7 Turn on the power of the devices connected to the
output terminals (powered speakers, power amplifier,
components, etc.).
E
F
18
1
2
[PHONES] terminals.
[MASTER OUT 1] or [MASTER
USB cable.
on this unit' s rear
2
3
• For the latest information on the required operating environment
and compatibility as well as to acquire the latest operating
system, refer to "Software Info" under "DDJ-SX2" on the
Pioneer DJ support site below.
http://pioneerdj.com/support/
• Operating System support assumes you are using the latest
point release for that version.
[Connections]
6
1
DDJ-SX2
3
4
5
3
2
4