Electrolux icon Use And Care Manual page 15

3rd Level: User Variable Options
Touching the options icon displays the
following options:
vacation mode Conserves energy by increas-
ing the time between automatic
defrost. This feature is automati-
cally activated during long periods
between door openings. Vacation
mode is manually activated when
the red indicator is lit.
water filter Touch to display filter condition
status. Press and hold for three
seconds to reset after filter change.
air filter Touch to display filter status. Press
and hold for three seconds to reset
after filter change.
temp display When active, it allows the display of
the freezer and fridge temps during
"Sleep Mode". The temperature is
displayed when the red indicator is
lit.
temp mode Touch to toggle display from
Fahrenheit to Celsius.
mute sounds Tones emitted by each keypress
can be turned off based on user
preference. The sounds are muted
when the red indicator is lit. Warn-
ing signals will stay active.
factory default Resets all refrigerator settings such
as temp, temp display, and alarm
tones to their factory default settings.
on off Press and hold for three seconds
to turn off the cooling system to
clean the refrigerator. It also turns
off the ice maker, all dispenser
functions, and the Custom Temp
drawer (select models). The
temperature display will read OFF.
IMPORTANT
Pressing the system on/off icon does not
turn off power to your refrigerator. You must
unplug the power cord from the wall outlet.
Setting cooling
temperatures
1 Touch
the glass
panel to
illuminate
the 2
nd
level of
display.
2 Select the options icon. Plus (+) and
minus (-) indicators will appear on either
side of the displayed temperatures.
3 Press the + or – indicator to adjust the
temperature to the desired setting.
The temperature display will begin
to blink with the first touch. After five
seconds of inactivity, the display will
beep to accept the new temperature.
After 10 seconds, the display times
out and returns to the basic display.
Alarms
Door Ajar If the door has been left open for an
extended period of time, an alarm will
sound and the door ajar indicator will
display on the center of the display. The
alarm is turned off by closing the door.
The alarm off key will blink to prompt the
reset of any pending alarms. Press this
key to reset any system Alarms.
High Temp In the event of a high temperature
condition, the temperature display will blink
and display "HI". After 20 minutes, the
high temp alert will be displayed and the
alarm off icon will illuminate until pressed,
acknowledging the alarm, at which time
the highest temperature reached will be
displayed and the refrigerator will resume
normal operation. All other modes are
turned off until the alarm is acknowledged.
TM
Power Fail In the event of a power failure, the power
fail alert will be displayed and the alarm
off key will blink until the alarm off icon is
pressed, acknowledging the alarm. Other
modes may be turned off until the alarm is
acknowledged. When the power fail alert
is turned off, the refrigerator will resume
normal operation. The high temp alarm
may also be illuminated until a safe operat-
ing range temperature has been reached.
Controls
15