Updating Firmware; Confirmation Of Firmware Version And Checksum; Initializing The Back-Up Ic - Yamaha YHT-196 Service Manual

Home theater package receiver/speakers
Hide thumbs Also See for YHT-196:
Table of Contents

Advertisement

■ UPDATING FIRMWARE

When the following parts are replaced, the firmware must be updated to the latest version.
DIGITAL P.C.B.
DSP FLASH ROM (IC243 on DIGITAL P.C.B.)
● Confirmation of firmware version and checksum
Before and after updating the firmware, check the firmware version and checksum by using the self-diagnostic
function menu.
Start up the self-diagnostic function and select "25. ROM VER/SUM/PORT" menu.
Using the sub-menu, have the firmware version and checksum displayed, and note them down.
(For details, refer to "SELF-DIAGNOSTIC FUNCTION")
*
When the firmware version is different from written one after updating, perform the updating procedure from the
beginning again.
● Initializing the back-up IC (EEPROM: IC222 on DIGITAL P.C.B.)
After updating the firmware, the back-up IC MUST be initialized by the following procedure to store the setting
information (soundfield parameters, system memory and tuner presetting, etc.) properly.
Start up the self-diagnostic function and select "24. FACTORY PRESET" menu. (For details, refer to "SELF-DIAGNOSTIC
FUNCTION")
Select "24. PRESET RSRV", press the " " (Power) key to turn off the power once and turn on the power again. Then
the back-up IC is initialized.
● Required Tools
CD, DVD or BD player (with DIGITAL OUTPUT (OPTICAL or COAXIAL) jack)
*
The following models can be used as a tool to update the firmware.
CD player:
CD-C600/CD-S1000/CD-S2000/CD-S300/CD-S700/CDX-496/CDX-596/CDX-890
DVD player: DV-C6760/DVD-840/DVD-C740/DVD-C750/DVD-C940/DVD-C950/DVD-CX1/DVD-S1200/DVD-S1800/
DVD-S2300(MKII)/DVD-S2700/DVD-S30/DVD-S510/DVD-S520/DVD-S530/DVD-S540/DVD-S550/
DVD-S657/DVD-S700/DVD-S80/DVD-S840
BD player:
BD-940/BD-S1065/BD-S1900/BD-S2900/BD-S671
Others:
CDR-D651/CDR-HD1000/CDR-HD1300/CDR-HD1500/DV-SL100/CDX-E100/CRX-430/CRX-E150/
RDX-E700
Optical cable (when OPTICAL jack is used)
Digital audio pin cable (when COAXIAL jack is used)
Firmware CD
Download the latest firmware from the specified download source and create the firmware CD.
HTR-2064/NS-B20/NS-C20/NS-SWP20
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Htr-2064Ns-b20Ns-c20Ns-swp20

Table of Contents