When checking the P.C.B.s:
•
Spread the rubber sheet and the cloth. Then place
this unit on the cloth and check it. (Fig. 3)
•
Reconnect all cables (connectors) that have been
disconnected.
•
When connecting the flexible flat cable, be careful
with polarity.
•
Connect the 3 ground points (G1, G2, G3) of the
POWER (1) P.C.B. to the chassis with a ground lead
or the like. (Fig. 3)
Top cover ass'y
トップカバーASSY
Front panel unit
フロントパネルユニッ ト
MAIN (1) P.C.B.
P.C.B. をチェックする場合には:
・ ゴムシートと布を敷き、 その上に本機を置いてチェッ
クします。 (Fig. 3)
・ 外したケーブル(コネクター)をすべて接続します。
・ フラットケーブルを接続する際、極性に注意してく
ださい。
・ POWER (1) P.C.B. の 3 箇 所 の ア ー ス(G1、G2、G3)
をアース線等でシャーシに接続してください。 ( Fig. 3)
Ground lead
アース線
Fig. 3
CRX-330/NS-BP110/NS-BP100
G3
POWER (1) P.C.B.
G2
Chassis
シャーシ
Loader mechanism unit
ローダーメカユニッ ト
Rubber sheet and cloth
ゴムシートと布
Ground lead
アース線
G1
17