Philips MatchLine 34PW9818 Quick Use And Setup Manual

Quick Use and Setup Guide
C
ONTENTS
Important Notice/Warning . . . . . . . . . . . . . . . . . . . . .1
Making Basic TV Connections
Basic Cable TV Connections . . . . . . . . . . . . . . . . . . .1
Basic Antenna TV Connections . . . . . . . . . . . . . . . . .1
Basic TV and Onscreen Menu Operation . . . . . . . . . .2
Remote Battery Installation . . . . . . . . . . . . . . . . . . . .3
Remote Control Button Descriptions . . . . . . . . . . . . .3
Using the Language Control . . . . . . . . . . . . . . . . . . . .4
How to Automatically Program Channels . . . . . . . . . .4
How to Use the Demo Feature . . . . . . . . . . . . . . . . . .4
C
ABLE
Y our Cable TV input into your home may be a single (75
ohm) cable or a converter box installation. In either
case, the connection to the TV is very easy. Follow the steps
below to connect your cable signal to your new television.
If your cable signal comes directly from a round 75Ω coaxial
cable use the following steps:
1
Connect the open end of the round Cable Company sup-
plied cable to the 75Ω input on the TV. Screw it down finger
tight.
2
Plug the television into the wall outlet and turn the TV on.
Refer to the AUTOPROGRAM feature to program all the
available channels on your cable signal.
If your cable signal comes from a cable box, use the following
steps:
3
Connect the open end of the round Cable Company sup-
plied cable to the cable signal IN(put) plug on the back of
the Cable Box.
4
Using a separate round coaxial cable, connect one end to the
OUT(put) plug on the back of the Cable Box.
5
Connect the other end of the round coaxial cable to the
75Ω input on the back of the television. Screw it down finger
tight.
6
Plug the television into the wall outlet and turn the TV on.
Refer to the TUNER and AUTOPROGRAM features on page
4 of this Quick Use Guide. TUNER should be set to the
CABLE option. AUTOPROGRAM can be set to program all
the available channels on your cable signal into the televi-
sion's memory.
A
NTENNA
A
combination antenna receives normal broadcast chan-
nels (VHF 2–13 and UHF 14–69). Your connection is
easy because there is only one 75Ω (ohm) antenna plug on
the back of your TV, and that's where the antenna goes.
1
If your antenna has a round cable (75 ohm) on the end,
then you're ready to connect it to the TV.
If your antenna has flat, twin-lead wire (300 ohm), you
first need to attach the antenna wires to the screws on a
300- to 75-ohm adapter.
2
Push the round end of the adapter (or antenna) onto the
75Ω (ohm) plug on the back of the TV. If the round end of
the antenna wire is threaded, screw it down finger tight.
3
Plug the television into the wall outlet and turn the TV
on. Refer to the TUNER and AUTOPROGRAM features on
page 4 of this Quick Use Guide. TUNER should be set to the
ANTENNA option. AUTOPROGRAM can be set to program
all the available channels on your cable signal into the televi-
sion's memory.
NOTE: This owner's manual is used with
several different television models. Not all
features (and drawings) discussed in this
manual will necessarily match those found
with your television set. This is normal and
does not require that you contact your deal-
er or request service.
B
ASIC
Direct Cable
TV
Connection:
Cable signal coming from
Cable Box Connection:
TV
Antenna Connection:
broadcast channels 2-13 (VHF) and 14-69 (UHF).
IMPORTANT
TV C
ONNECTIONS
Cable Company (Round
75Ω coaxial cable)
1
Jack Panel
Back of TV
3 4
INPUT
OUTPUT
Round 75Ω
Coaxial Cable
Cable Signal IN from
the Cable Company
5
Outdoor or Indoor Antenna
(Combination VHF/UHF)
The combination antenna receives normal
300 to 75-ohm
Adapter
1
Twin
Lead Wire
Round 75Ω Coaxial
Cable from Antenna
3104 315 2179.1
Color TV
Color TV
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.
As an Energy Star® Partner, Philips
Consumer Electronics has determined this
product meets the Energy Star® guidelines
for energy efficiency. Energy Star® is a U.S. registered
mark. Using products with the Energy Star® label can
save energy. Saving energy reduces air pollution and
lowers utility bills.
Jack Panel, Back of TV
2
AC Power
Wall Outlet
2
Power Plug
from back of TV
Jack Panel Back
of Cable Box
Cable Box
Power Cord
AC Power
Wall Outlet
Jack Panel
Back of TV
6
Power Plug
from back of TV
AC Power
Wall Outlet
3
Power Plug
from back
of TV