Adjustment Of Sensor Detection Sensitivity - Sharp FP-F40TA Operation Manual

OFF TIMER
Select the length of time you want, with the unit on. The unit automatically stops once the selected
time is reached.
Light Control
You can set the DUST/PLASMACLUSTER SIGN to OFF when their SIGN is bright.
ON
more than 3 sec.
Plasmacluster Ion ON/OFF
When Plasmacluster Ion is ON, the PLASMACLUSTER SIGN will turn on. (blue)
(In operation)
ON
more than 3 sec.

ADJUSTMENT OF SENSOR DETECTION SENSITIVITY

Set to "Low" if the DUST SIGN is constantly red to reduce sensitivity, and set to "High" if the DUST
SIGN is constantly green to increase sensitivity.
1
(with the unit OFF)
2
3
OM_FP-F40TA_TH-EN.indb 7
OFF
OFF
more than 3 sec.
NOTE
• When the unit starts operation,
the DUST/PLASMACLUSTER
SIGN always lights.
more than 3 sec.
• In SLEEP mode, Light Control
button doesn't operate.
more than 3 sec.
NOTE
High
• If the power OFF Button is not
pushed within 8 seconds of
adjusting sensor sensitivity, the
setting will be saved automatically.
Standard
• The sensor sensitivity setting
will be saved even if the unit is
unplugged.
Low
E-7
CANCELLATION
4/10/2558 BE 3:37 PM