Troubleshooting - Philips Magnavox MS3652S Owner's Manual

No Power
• Check the TV power cord. Unplug the power cord, wait 10
seconds, then reinsert the plug into the outlet and push the
POWER button again.
• Check that the outlet is not on a wall switch.
• Be sure the fuse is not blown on the AC power strip if one is
being used.
No Picture
• Check the antenna connections. Are they properly secured to
the TV's ANT 75Ω plug?
• Check the TUNER MODE control for the correct tuner set-
ting.
• Try running the Auto Program feature to find all available
channels.
No Sound
• Check the VOLUME buttons.
• Check the MUTE button on the remote control.
• If you're attempting to hook up auxiliary equipment, check
the audio connections to the TV from the other device.
T
ROUBLESHOOTING
Remote Does Not Work
• Check the batteries. If necessary, replace them with AA
Heavy Duty (Zinc Chloride) or Alkaline batteries.
• Clean the remote control and the remote control sensor on
the front of the TV.
• Check the TV power cord. Unplug the power cord, wait 10
seconds, then reinsert the plug into the outlet and push the
POWER button again.
• Be sure the fuse is not blown on the AC power strip, if one is
being used.
• Check to be sure the power outlet is not on a wall switch.
TV Displays Wrong Channel or No Channels Above 13
• Repeat channel selection.
• Add the desired channel numbers (using the CHANNEL
EDIT control) into the TV's memory.
• Check to be sure TUNER MODE is set to CABLE if you
have Cable TV service. Run the Auto Program feature to find
all available channels.
Channels 1-125 can be possible only if you have Cable TV
service. If you are using an Antenna, only channels 2-69 can
be possible.
34