Additional features
3
1
3
4
1. Adjusting the clock:
GB
Press and hold the Set button until
the time (hours) on the display starts
flashing. Press the Scroll up ( ) or
Scroll down ( ) button to change
hours, then press the Set button to
confirm. Set minutes (and AM or PM)
by using the ( ) or ( ) button, press
the Set button to confirm.
Note: If no button is pressed the appli-
ance will automatically close the clock
setting interface after 5 seconds.
4. The Aroma Selector extends the
brewing time to maximize the fla-
vour extraction and get a stronger
coffee for a small number of cups
(normally less than 6). Press the
Aroma button to adjust the aroma
setting.
18
1
2
AM
PM
4
2. Adjusting the keep warm tem-
perature (for the Coffee maker
with Glass jug only): Press the
Option button. Choose the desired
temperature (High/Medium/Low)
by pressing the ( ) or ( ) button.
Press the Set button to confirm.
CHANGE
FILTER
5. The display will show "Change
Filter" after 60 brew cycles, to
let the user know that the PureAd-
vantage™ water filter needs to be
replaced.
Place the filter into a container of
clean cool water, and let soak for 10
minutes.
3
KEEP WARM
2
3
AM
PM
3. Brewing coffee with the program
time setting: Press and hold the
Auto/Start button until the display
shows the time and the program
time indicator. Set the time by using
the ( ) or ( ) button, press the Set
button to confirm.
Press the Auto/Start button to start
or pause the program time setting.
6. Place the PureAdvantage™ water
filter (filter end first) into the pocket
located at the bottom of the water
reservoir.