Subscribe to Our Youtube Channel
Related Manuals for Super Circuits avsi-10
Summary of Contents for Super Circuits avsi-10
- Page 1 AVSI-10 Interview Room System Setup and User Guide PLEASE READ THIS MANUAL BEFORE USING YOUR SYSTEM, and always follow the instructions for safety and proper use. Save this manual for future reference. AVSI-10_SM 170328...
- Page 2 Operate this system only in environments where the temperature and humidity is within the recommended range. Operation in temperatures or at humidity levels outside the recommended range may cause electric shock and shorten the life of the product. Refer to the specifications for each system component for more information. CAUTION LEGAL NOTICE Supercircuits...
-
Page 3: Table Of Contents
5.4 System Maintenance ..............51 AVSI-10 Interview Room System Setup and User Guide... - Page 4 NOTES www.Supercircuits.com...
-
Page 5: Systems Overview
Systems Overview The AVSI-10 Interview Room system is a premium quality scalable video and audio digital recording system ideally suited for indoor installation in rooms where interviews or interrogations occur. Recording can be started and stopped with one switch, or manually at the recorder. -
Page 6: System Components
SECTION 1: SYSTEM OVERVIEW 1.1 System components The interview room system components include: Quantity Description ALI-QVR5016H Alibi 5000 Series 16-Channel 1080p/960H HD-TVI/Analog/IP Hybrid+ Real-Time Security digital video recorder HDD1TWDP 1TB SATA Hard Drive ALI-L22W Alibi 21.5 Inch 1080p Full-HD Widescreen Security-Grade LED Monitor AVSI-KIT Interview Room Switch / Mic Kit ALI-TS2012VR... - Page 7 Audio adapter male RCA to 1/8” female phono plug: for adapting the recorder audio out RCA connector (normal) to a mini- • stereo cable for connection to display or PC speakers. CAB-ASK cable CAB-SWITCH cable AVSI switch (special) Audio adapter ASK-4KIT-101 AVSI-10 Interview Room System Setup and User Guide...
- Page 8 SECTION 1: SYSTEM OVERVIEW ALI-TS2012VR Camera Alibi 2.0 Megapixel HD-TVI 130’ IR WDR Vandalproof Outdoor Varifocal Dome Security Camera includes a 2.0MP High-Performance CMOS that deliver sharp, detailed 1080p resolution HD video.. One of the advantages of this varifocal camera is the 2.8-12mm motorized zoom lens that allows you to remotely change the Field of Vision (FOV).
- Page 9 It connects to the audio out jack on the back of the ALI-QVR5016H recorder. FEMALE-POW Power cable EZ-Connect power cable with plug for use with the DC12-1000R power adapter. AVSI-10 Interview Room System Setup and User Guide...
-
Page 10: Camera Options
SECTION 1: SYSTEM OVERVIEW 1.2 Camera options You can upgrade your system to include any of the following cameras: Description CVTTMEW Covert Thermostat with High-Resolution Day/Night Hidden Camera CVTPREW-IR Indoor Day/Night PIR Sensor 30’ IR Color Hidden Camera CVTCLEW Wall Clock Wired High-Resolution Day/Night Hidden Camera CVTTMEW The wired thermostat with hidden day/night camera blends into the interview room wall space for unobtrusive monitoring. - Page 11 The hidden camera has 700 lines of resolution, a 0.0001 lux low light rating and operates on 130 mA at 12 Vdc. The clock should be mounted where a clock is usually located. AVSI-10 Interview Room Systems Setup Guide...
-
Page 12: Getting Started: Unpacking Your System
SECTION 2: GETTING STARTED: UNPACKING YOUR SYSTEM SECTION 2 Getting Started: Unpacking Your System 2.1 Unpacking the equipment Remove the equipment from its packaging and place it on a flat, clean surface. Inspect each item. If any visible damage is present, contact your supplier for a replacement. -
Page 13: System Setup
Ensure that the power connector on the camera end of the cable will mate with the power connector on the camera drop cable. AVSI-10 Interview Room System Setup and User Guide... -
Page 14: Install The Ask-4Kit-101 Audio Monitoring System
SECTION 3: SYSTEM SETUP Connect the extension cables to the camera drop cables. At the recorder, connect the video extension cable to the camera VIDEO IN 1 port on the back of the recorder. See the photo below. VIDEO IN 1 port DC12-1000R power adapter Connect the power extension cable to a DV12-1000R power adapter as shown in the photo above. - Page 15 AUDIO IN 1 port on the back of the recorder. See the photo below. Wire to Audio RCA AUDIO OUT Louroe Base Station Wire to power adapter patch cables VGA port microphone AUDIO IN 1 port Wire to speakers Audio adapter AVSI-10 Interview Room System Setup and User Guide...
-
Page 16: Mount And Wire The Avsi Switch
SECTION 3: SYSTEM SETUP Plug the Louroe power adapter provided with the ASK-4KIT 101 into the 12 Vdc jack on the back of the Louroe base station. Do not plug the power adapter into an electrical outlet at this time. Plug the speaker wire into the RCA male to 3.5 mm female audio adapter, and then plug the audio adapter into the AUDIO OUT VGA port on the back of the recorder. - Page 17 Re-attach the box to the backing plate with the cables routed through the knockout and the 12VDC Output cable connector contained within the box. Use the two Phillips screws removed earlier. See the photo below. AVSI-10 Interview Room System Setup and User Guide...
-
Page 18: Connect The Cab-Switch Cable To The Recorder Alarm Terminals And To 12 Vdc Power
SECTION 3: SYSTEM SETUP Arrange the cables within the box so they are packed along the left side as shown above, then reattach the AVSI switch cover using the two hex screws removed earlier. 3.5 Connect the CAB-SWITCH cable to the recorder alarm ter- minals and to 12 Vdc power At the back panel of the recorder, do the following: Remove about 2”... - Page 19 Contact your vendor support organization if additional help is needed. Flip the AVSI switch to the down (standby) position. Verify that the red light is on. Leave this switch in the down position. AVSI-10 Interview Room System Setup and User Guide...
-
Page 20: Powering On The System For The First Time
SECTION 3: SYSTEM SETUP 3.6 Powering on the system for the first time Powering on the system for the first time includes steps to perform the initial recorder configuration and verify system functionality. When performing this procedure, refer to the following documents for more information: ALI-QVR5016H 16-Channel AHD, Analog, HD-TVI, 960H and IP Camera Recorder Quick Setup Guide ALIBI™... - Page 21 SECTION 3: SYSTEM SETUP In the Language screen shown below, click Apply to continue. AVSI-10 Interview Room System Setup and User Guide...
- Page 22 SECTION 3: SYSTEM SETUP In the first Wizard window, click in the Admin Password entry field, and then use the virtual keyboard to enter the default administrator password for the system: password1. Click the Return key in the lower right corner of the keyboard to complete the entry.
- Page 23 In the Attention window, verify that the password is modified (see below), and then click OK to continue. If a different message appears, correct whatever is needed, and then click Next as shown above, and OK to continue. In the next Wizard window, click Previous to return to the password screen. AVSI-10 Interview Room System Setup and User Guide...
- Page 24 SECTION 3: SYSTEM SETUP In the password screen shown below: Enter your new Admin password in the Admin Password field. Uncheck the New Admin Password select box. Insert a flash media drive into an open USB port on the recorder. Click on the Export GUID field shown below.
- Page 25 Create a new folder on the drive, if needed, or double click on an existing folder to open/select it. Click the Export button to write the GUID file to the folder that is open. If the export was successful, the Attention window shown below will appear. AVSI-10 Interview Room System Setup and User Guide...
- Page 26 SECTION 3: SYSTEM SETUP Click OK in the Attention window to close it, and then verify that the GUID file is now shown in the folder. See the example below. Click the Back to return to the Wizard. Remove the USB drive from the recorder and store it in a secure location. In the Date/Time setup screen: Open the Time Zone drop down list, and then select the time zone for your location.
- Page 27 Uncheck the Enable DHCP box and the Enable DNS DHCP box if the network settings assigned by DHCP are — acceptable. Unchecking these boxes assures that the settings are not changed, which is preferred if remote logins to the recorder are used. Click Next to continue. AVSI-10 Interview Room System Setup and User Guide...
- Page 28 SECTION 3: SYSTEM SETUP Uncheck the Enable DHCP box and/or the Enable DNS DHCP box, and then enter your preferred network settings. — Your settings must be compatible with the LAN on which the recorder is attached (see below). Consult with your network administrator for suggested settings.
- Page 29 The next Wizard window is used to add network (IP) cameras to the recorder, needed. These cameras can be used for surveillance, or with other interview rooms. Refer to the ALIBI™ Embedded Video Recorder Firmware User Manual provided by your equipment vendor for more information. Click Next to continue. AVSI-10 Interview Room System Setup and User Guide...
- Page 30 SECTION 3: SYSTEM SETUP The next Wizard window is configure the recorder for Continuous or Motion Detection recording. Click OK to continue and exit the Wizard. NOTE: Your recorder is preconfigured to record on Channel 1 when the AVSI switch is on, and to record on each other channel when motion is detected on that channel.
- Page 31 01 (interview room camera) is selected. In this menu: Add colorful objects to the interview room, and set the lighting to the normal lighting level. The video in the screen below is not a good example. AVSI-10 Interview Room System Setup and User Guide...
- Page 32 SECTION 3: SYSTEM SETUP Adjust the brightness, contrast, saturation, hue, sharpness and noise to perfect the image from the A1 camera. Click Apply to save your settings, and then click Back to return to the Menu icon window in the Live View screen. Click Exit to close the Menu icon window.
-
Page 33: Test/Use The Interview Room System
Set the AVSI switch to ON. The camera image of Camera 01 should expand to full screen and a red status icon (recording in progress) should appear in the upper right corner of the screen. Record the time when the AVSI switch was turned on. This information will be used later during playback. AVSI-10 Interview Room System Setup and User Guide... -
Page 34: Playback Recorded Video
SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM While recording, move throughout the field of view, and talk normally. Verify that audio can be heard through the speakers. Set the AVSI switch to OFF. The Live View screen should return to Multi-screen mode, and the red status icon in the upper right corner of Camera 01 video should disappear. - Page 35 SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM In the Menu window, click the Playback icon. In the camera list on the right, select the Camera 01, the interview room camera. AVSI-10 Interview Room System Setup and User Guide...
- Page 36 SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM Recording of interest Playback control icons Click icons here to expand or contract the timeline. In the calendar below the camera list, click on the date of the recording you want to playback. In the example above, March 9, 2017 was selected.
- Page 37 Volume control Tag, clip, file controls Playback control icons Expanded timeline Zoom Start/stop default custom Mute clip management Start/end time of recordings Playback speed Recorded video clips Playback timestamp Playback motion controls Timeline AVSI-10 Interview Room System Setup and User Guide...
-
Page 38: Tagging Recorded Video
SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM Playback screen icons During playback of the video, verify that you can hear sound from the recording, and the video started and stopped at the time when the AVSI switch was toggled. 4.2 Tagging recorded video You can tag, or name, video clips during playback, and then easily search for and play them back later. - Page 39 Add Customized Tag icon. In the window that opens, enter a Tag Name, and then click OK to close the window. Notice that the tag is time stamped at the time the window opens. AVSI-10 Interview Room System Setup and User Guide...
-
Page 40: Search For And Playback A Tag
SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM 4.2.1 Search for and Playback a Tag Stop video playback in the Playback screen. In the upper left corner of the screen, open the drop down list, and then select Tag. Check the box to select Camera 01, or select all cameras. In the screen shown below, you can search for a tag by Keyword, or specify the Start Time and End Time of the timespan when the tag was created. -
Page 41: Export Recorded Video
Plug a USB flash media device into a USB port. Playback the video file that contains the content you want to export. Using the playback controls, position the video at the frame that begins the content you want to export. AVSI-10 Interview Room System Setup and User Guide... - Page 42 SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM Click the Clip icon at the bottom of the window. A balloon will appear to signal Start Clipping. Clip icon. Position the video at the end of the content you want to export, and then click the Clip icon again. This time, a balloon will appear to signal Stop Clipping.
- Page 43 SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM Click the File Management icon. FIle Management icon. In the File Management menu, check the select box for the video clip you want to export, and then click Export. AVSI-10 Interview Room System Setup and User Guide...
- Page 44 SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM In the Export window, double click on the folder where you want to export the file, and then click Export. In the next Export window that opens, select either Video and log or Player, and then click OK. Allow the export operation to complete, and then click OK in the Export finished message window.
-
Page 45: Using The Export Menu To Locate And Export Video Files
Right click anywhere on the Live View screen, and then click Menu in the popup list. NOTE: An Admin login window may appear. If it does, enter your Admin password in the window, and then click OK to continue. In the Menu window, click the Export icon. AVSI-10 Interview Room System Setup and User Guide... - Page 46 SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM By default, Normal export mode is selected in the Export window. For efficiency, deselect the cameras that didn’t record the video you want to export. Only camera A1 (the interview room camera) is selected here. Click the Start Time and End Time date and time fields to set the time span during which the video was recorded.
- Page 47 In the next Export window that opens, select either Video and log or Player, and then click OK. Allow the export operation to complete, and then click OK in the Export finished message window. AVSI-10 Interview Room System Setup and User Guide...
- Page 48 SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM Verify that the file you exported now appears in the directory on the flash drive. Click Back to return to the Search result window. Export using the Event menu features In this example, we’ll search for the Alarm event (created by setting the AVSI switch to ON) that triggered a recording. Right click anywhere on the Live View screen, and then click Menu in the popup list.
- Page 49 Time and End Time during which the event occurred. By default, the video and audio for 30 seconds before and 30 seconds after the event will also be included. Click Search. Search results will appear in a Chart (thumbnail) view. AVSI-10 Interview Room System Setup and User Guide...
- Page 50 SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM Check the select box for the video file(s) you want to export, and then click the Export button. In this example, both files were selected. You can also view your search results in List view. In List view, you can also Lock files. In the Export screen, open (double click on) the directory in the USB flash media drive, and then click Export to continue.
- Page 51 Allow the export operation to complete, and then click OK in the Export finished message window. Verify that the files you exported appear in the directory on the flash drive in addition to the file exported earlier. Click Back to return to the Search result window. AVSI-10 Interview Room System Setup and User Guide...
-
Page 52: Manual Recording
SECTION 4: TEST/USE THE INTERVIEW ROOM SYSTEM 4.4 Manual recording You can manually record Live View video and audio from your interview room without using the AVSI switch. When using this method, the green LED on the switch will not light. To start recording, left click inside the Live View window you want to record, then click the Start Recording icon in the quick setting toolbar. -
Page 53: Advanced Recorder Features
32 user accounts. To add, edit, and delete user accounts, you must log into the recorder with admin user credentials. Refer to the ALIBI Embedded Video Recorder Firmware User Manual for your ALI-QVR4000 series recorder for more information. User Management - user configuration User Camera Configuration settings AVSI-10 Interview Room System Setup and User Guide... -
Page 54: Network Setup
CHAPTER 5: ADVANCED RECORDER FEATURES 5.2 Network Setup Network settings can be configured properly before you can connect to the recorder remotely. By default, the recorder is not configured for DHCP (Dynamic Host Configuration Processor - to acquire network settings from the network’s Domain Name Server (DNS) or DDNS (Dynamic Domain Namve Server - for accessing the recorder conveniently from the internet). -
Page 55: System Maintenance
Features also include the export and import of the system configuration file, firmware upgrade and factory reset. Refer to the ALIBI Embedded Video Recorder Firmware User Manual for more information. System Maintenance menu AVSI-10 Interview Room System Setup and User Guide... - Page 56 NOTES www.Supercircuits.com...
Need help?
Do you have a question about the avsi-10 and is the answer not in the manual?
Questions and answers