Page 2
For a large print version of these instructions please call Marketing on 0845 121 7400. Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other printed material. All trademarks in this material are property of the respective companies.
Page 3
Thank you for buying a Danfoss product Danfoss Heating...
Neither does the setting affect how quickly the room cools down. Turning a room thermostat to a lower setting will result in the room being controlled at a lower temperature, and saves energy. RET1000 MD...
Page 5
Room thermostats need a free flow of air to sense the temperature, so they must not be covered by curtains or blocked by furniture. Nearby electric fires, televisions, wall or table lamps may prevent the thermostat from working properly. Danfoss Heating...
If the green LED flashes once every 3 seconds the delayed start function is in operation. Delayed start can be cancelled by turning the setting dial. Delayed start will operate again on timer control next ON time. RET1000 MD...
Setting the temperature Turn setting dial to required temperature. For best comfort control initially set the dial to a lower temperature than desired, say 18°C. Then turn it up by one degree each day until a comfortable temperature is reached. Danfoss Heating...