How to print labels using MS Tools
5.c.1 Equipment, Software and drivers required
Software required : MS tools
MS Tools software version 4.01 (or higher) is required to print labels.
This software is provided by MITSUBISHI ELECTRIC France under floppy format (2 floppies)
MS Tools is available on Windows 95, 98, NT4 OS and to install it you need theses 3 files:
Click on Finish
Click on OK
MS Tools is now installed on your computer and available in your START menu
MS tools program does not send information directly to ZEBRA 90Xi II printer, it sends information to NI
VISA driver and NI VISA driver sends information to ZEBRA 90Xi II printer.
Driver required: NI VISA
NI VISA driver is required and can be provided by MITSUBISHI ELECTRIC France.
The NI VISA driver is located on NATIONAL INSTRUMENTS NI 488.2 CD-ROM
To install this driver on your PC, launch the setup.EXE which is located in the NI-VISA folder on the CD-
Level 2 Service Manual
mobile with battery
Mitsubishi Electric Telecom Europe
ZA le Piquet, 35370 Etrelles
Phone: +33 2 99 75 71 00
Fax: +33 2 99 75 71 47