Remote Use With Accessory Devices (Code Entry) - Philips 32PS60B Directions For Use Manual

R U
EMOTE SE WITH
N ow that you have looked up the
three-digit Remote Code Number
for your brand of device, you are ready
to follow the four simple steps below.
Please read through steps 1-4 before
beginning.
Place the TV/VCR/ACC Mode
Switch in the proper position.
Press the VCR • RECORD button
on the remote control and release.
Press the AUTO SOUND button
on the remote within 30 seconds, then
release.
Enter the THREE-DIGIT
REMOTE CODE NUMBER for your
desired device. The remote is now
ready to send commands to the unit.
Point the remote at the Device.
Press the POWER button on the remote
to turn the unit ON.
S H
MART ELP
Remember, if this doesn't work
the first time, repeat the steps
using a different remote code number.
After a second try and the remote does
not operate your device, see if there is
another three-digit code number (pages
36-38) listed for your device and repeat
the steps above using the new number.
If after repeated attempts the code num-
ber method does not work you device, try
the SEARCH METHOD on the next
page.
NOTE: Setting up the remote is for use
with external accessory devices only and
not for use with other television brands.
A D
CCESSORY EVICES
1
VCR
Satellite Receiver
or DBS, DVD
Cable Converter
34
- C E
ODE NTRY
2
VOL
5
M
ETHOD
3
4