Environmental Friendliness - Siemens simovert masterdrives Operating Instructions Manual

06.2006
13

Environmental Friendliness

Environmental
aspects during the
development
Plastic components
used
Environmental
aspects during
production
Environmental
aspects for disposal
Siemens AG 6SE7087-6KN50
SIMOVERT MASTERDRIVES
The number of components has been significantly reduced over earlier
converter series by the use of highly integrated components and the
modular design of the complete series. Thus, the energy requirement
during production has been reduced.
Special significance was placed on the reduction of the volume, weight
and variety of metal and plastic components.
ABS: PMU support panel
LOGO
LDPE: Capacitor ring
PA6.6: Fuse holders, mounting rail,
capacitor holder, cable retainer,
connecting strips, terminal strip,
supports, PMU adapter, covers,
cable holder
Halogen-containing flame retardants were, for all essential
components, replaced by environmentally-friendly flame retardants.
Environmental compatibility was an important criterium when selecting
the supplied components.
Purchased components are generally supplied in recyclable packaging
materials (board).
Surface finishes and coatings were eliminated with the exception of the
galvanized sheet steel side panels.
ASIC devices and SMD devices were used on the boards.
The production is emission-free.
The unit can be broken down into recyclable mechanical components
as a result of easily releasable screw and snap connections.
The plastic components are to DIN 54840 and have a recycling symbol.
After the service life has expired, the product must be disposed of in
accordance with the applicable national regulations.
Operating Instructions
Environmental Friendliness
PC: Covers
PP: Insulating boards
bus retrofit
PS: Fan housing
UP: Tensioning profile
retaining bolts,
tensioning disk
13-1