CityTab Vision 7”i Device User Guide Thank you for your purchase of the Colorovo CityTab Vision 7”i tablet. We are sure that it will meet your expectations. Before using the device please read the following instructions. Safety information Please adhere to these instructions and the markings on the device.
Page 3
CityTab Vision 7”i Do not make repairs or modifications to the device and its accessories. The guarantor is not liable for damage or loss of data. Hearing protection information This device complies with the applicable rules for consumer audio devices on the limitation of output volume to a safe level.
The Guarantor reserves the right to modify the user guide at any time without prior notice. Package contents Colorovo CityTab Vision 7”i tablet Charger 230V ~50 Hz / 5V 2A Cable USB–microUSB...
CityTab Vision 7”i Tablet operation Battery charging To charge the battery, connect the tablet to attached AC charger. Note: Full charge takes a few hours. Charge the battery at least once a month to maintain its efficiency. If the device turns off because of a discharged battery, charge it for at least five minutes before restarting.
CityTab Vision 7”i Turning the tablet on/off To turn the tablet on: 1. Press and hold the power button until you see the boot screen. 2. The system will start up in about 1 minute. To turn the tablet off: 1.
Check regularly for updates and install them immediately. 1. Go to http://colorovo.eu and find your tablet model in the Support section. 2. On the „Downloads” tab, check for new updates available for your tablet.
1. Before cleaning, unplug the tablet from the power supply and any other devices. 2. We recommend using Colorovo cleaning products. Use a dry or slightly damp, non- -scratch and lint-free cloth. Follow the detergent label instructions. Android™ User Guide Firstly, read the attached device manual.
Page 10
CityTab Vision 7”i The home screen consists of five separate pages on which you can place shortcuts, widgets, etc. To go to the next page of the extended screen, swipe your finger left or right on the screen. Buttons „Back” button – goes back to the previous screen. „Home screen”...
CityTab Vision 7”i Extended home screen The home screen consists of five separate pages on which you can place shortcuts, widgets, etc. To go to the next page of the extended screen, swipe your finger left or right on the screen. Keyboard To enter text, click the text box to display the keyboard.
Page 12
CityTab Vision 7”i Wi-Fi connection configuration 1. Open the settings menu 2. To enable Wi-Fi, select „Wi-Fi” and move the slider to the „ON” position. 3. The tablet will automatically search for Wi-Fi networks within device range and display them in the panel on the right side of the screen. 4.
CityTab Vision 7”i 3G connection configuration via external USB modem* To use the 3G network from the tablet via an external modem: 1. Install the 3G network SIM card in a modem according to the manual attached to it. 2. Connect the 3G modem to the USB port in the tablet. 3.
CityTab Vision 7”i Note: Restoring factory setting will remove all your data – ensure you back it up to external media first. Troubleshooting Problem Solution ged. Connect the tablet to the charger and try to turn it on again after about 5 minutes.
Need help?
Do you have a question about the CityTab Vision 7 i and is the answer not in the manual?
Questions and answers