Remote Control Codes In Service Factory Mode - Pioneer PDP-4271HD Service Manual

1

8.1.4 REMOTE CONTROL CODES IN SERVICE FACTORY MODE

A
SR/R Keys
Muting
(DOWN)
(UP)
(LEFT)
(RIGHT)
ENTER/SET
INPUT
INPUTxx
CH+/P+
CH-/P-
B Numeric keys
POWER
FACTORY
HOME MENU Note 1 )
VOLUME+
VOLUME-
DRIVE ON/OFF Note 2 )
INTEGRATOR Note 1 )
Note 1 ) A pertinent key that exists in the service remote control, becomes effective only in the factory and integrator mode.
Please use the remote control of the attachment when you normally operate it in the mode (home menu operation, etc.).
Note 2 ) When ten seconds have passed since the [ DRIVE ON/OFF ] key was pressed at the standby, it becomes invalid.
C
Please press [ POWER ] key from the [ DRIVE ON/OFF ] key pressing within ten seconds when you do power supply ON
while driven OFF.
D
E
F
120
1
2
Basic Functions
Switching the main items
Switching the subtitled items.
Switching the subtitled items.
Decreasing the adjustment value.
Increasing the adjustment value.
Switching the layers.
Selecting INPUT.
Selecting INPUT.
Increasing the channel number.
Decreasing the channel number.
Function: TV
Power OFF
Factory OFF(Factory mode)
Factory ON(Non-Factory mode)
Menu ON.
Volume UP.
Volume DOWN.
Drive Mode OFF.
INTEGRATOR MENU ON
PDP-4271HD
2
3
Remarks
Shifting to the next main item (top).
Shifting downward to the next subtitiled item.
Shifting upward to the next upper layer.
Decreasing the adjustment value.
Increasing the adjustment value.
Shifting downward or upward to the next lower or upper layer.
Shifting the INPUT to the next function.
Switching the INPUT to xx. (xx=1-6 etc)
Advanving.
Function: TV(previously selected channel number is selected).
Turning the power off.
In Factory mode , turning Factory mode off.
In Non-Factory mode , turning Factory mode on.
In Factory mode , turning Factory mode off, and Menu mode on.
Increasing 10 the adjustment value. (PANEL FACTORY)
Increasing 10 the adjustment value. (PANEL FACTORY)
Turning Drive mode off.
Enter INTEGRATOR MODE.
3
4
4