Traverse Assembly - Panasonic DVD-LX110EE Service Manual

DVD-LX110EE / DVD-LX110GCS
8.4.

Traverse assembly

8.4.1. Removing traverse assembly
1. Solder the 2 laser short lands on the flexible cable.
2. Unlock the connectors and remove the flexible cables.
8.4.2. Reinstalling traverse assembly
1. Reinstall the traverse assembly to the specified pin of the
unit.
2. Reinstall the flexible cable of the optical pickpup unit and
lock it securely.
3. Remove the solder of each laser short land of the flexible
cable.
Caution:
Remove the solders completely: otherwise the laser
diode won´t emit light.
4. Reinstall the spindle flexible cable as shown figure.
16