Display Specifications - Kenwood DDX3021 Service Manual

4.3.3 Clearing the production mode
• Power OFF by the [POWER] key
• Power OFF by ACC OFF
• Power OFF by battery OFF
• Power OFF by detach detection
Clear the production mode by one of the 4 options above and re-
turn to the normal mode.
4.4 SS mode
4.4.1 Switching to SS mode
Press and hold the [TEL] key (1) and, within 0.5 sec., touch the
upper right corner (2) of the touch panel.
(1)
4.4.2

Display specifications

When any of the above SS mode screens is displayed (Page 1/
3, 2/3, 3/3), set the audio selector to MUTE (equivalent to Stand-
by source).
Upon exiting the SS mode to return to the normal mode, restore
the audio selector to the original source.
Text
SYS V ****
APP V *****
DATA V ****
DISC V ****
DivX ****
BT V ***
Span *
(2)
Type
Model
DISC-AREA
reg.
Ok Display for
All Items Above
TUN : Y or N
MON : Y or N
TOU : Y or N
SUM OK ******** Display APP micro-controller program area's
SUM OK ******** Display APP micro-controller design data ar-
S.NO
DATA1 V****
DATA2 V****
DATA3 V****
(No.WA022<Rev.001>)30/36
Description
Display of system controller version
Display of APP micro-controller + design
data version
Display of Font data version
Display of DISC mecha module's version
Display of DvX version
Display of BT module's firmware version
Display of Span selection status of Tuner.
Display as K or M. *For areas that do not
support Span selection, display as "-".
Area information
Model information
Area information of DISC mecha module
Region code
When APP & DATA CHKSUM is executed,
check against data in USB, and display OK
or NG. *Not displayed if it is not executed.
*Display NG in red.
Display the SmeterLevelOffset adjustment
status of Tuner. Y: adjustment complete, N:
not adjusted. *Display N in red.
Display status of monitor adjustment by pro-
duction line. Y: adjustment complete, N: not
adjusted. *Display N in red.
Display status of touch panel adjustment by
production line. Y: adjustment complete, N:
not adjusted. *Display N in red.
sum and check sum results. Check sum OK
or NG. *Display NG in red.
ea's sum and check sum results. Check sum
OK or NG. *Display NG in red.
Serial number. Not written: ------ Models that
do not support serial numbers: None *Dis-
play "------" in red.
Display of opening data's version
Display of wallpaper data's version
Display of steering remote control threshold
version
Displays the version number when threshold
data is written using USB.
For DOP models, display as follows as the
fixed value is retained from the beginning.
HONDA : KC
MAZDA : KF
MITSUBISHI : KG
ISUZU : KJ
NISSAN1 : KS1
NISSAN2 : KS2
TOYOTA : KL