Kenwood DDX3021 Service Manual page 26

(1) NORMAL PLAY
Process test item [1] of the check mode specification
2nd line display: NORMAL PLAY
3rd line display: Available
(2) EF OUT-TRACKING OFF
Process test item [2] of the check mode specification
2nd line display: EF OUT-TRACKING OFF
3rd line display: Nil
(3) EF IN-TRACKING OFF
Process test item [3] of the check mode specification
2nd line display: EF IN-TRACKING OFF
3rd line display: Nil
(4) CD-LASER ON
Process test item [4] of the check mode specification
2nd line display: CD-LASER ON
3rd line display: Available
(5) DVD-LASER ON
Process test item [5] of the check mode specification
2nd line display: DVD-LASER ON
3rd line display: Available
(6) DVDx1 JITTER MODE
Process test item [6] of the check mode specification
2nd line display: DVDx1 JITTER MODE
3rd line display: Available
(7) SEARCH & JITTER
Process test item [10] of the check mode specification
2nd line display: SEARCH & JITTER
3rd line display: Available
(8) MONITOR
Process test item [11] of the check mode specification
2nd line display: MONITOR
3rd line display: Available
(9) DVDx1 PLAY
Process test item [12] of the check mode specification
2nd line display: DVDx1 PLAY
3rd line display: Available
(10) STOP
Process test item [13] of the check mode specification
2nd line display: STOP
3rd line display: Nil
(11) EJECT
Process test item [14] of the check mode specification
2nd line display: EJECT
3rd line display: Nil
(12) LOAD
Process test item [15] of the check mode specification
2nd line display: LOAD
3rd line display: Nil
(13) SLEEP
Process test item [16] of the check mode specification
2nd line display: SLEEP
3rd line display: Nil
(14) EEPROM DATA OSD
• Send "OSD display request command" (start EEPROM
record data OSD display mode) to the DISC module.
• When a remote control key command (CURSOR UP/
DOWND/LEFT/RIGHT) is received while this item is se-
lected, send CURSOR UP/DOWND/LEFT/RIGHT as it is
to the DISC module.
• After this item is selected, only POWER OFF is valid, and
selection of items [1] to [13] will not be valid.
(As DISC module does not guarantee normal operation
after moving to this mode)
2nd line display: EEPROM DATA OSD
3rd line display: Nil
4.2.4 RUNNING MODE display specifi cations
Directly touch the item to select the operation.
DVD MODE5: Displays the currently selected mode
COUNT: Counter display
DVD ERROR: Displays the error code for error in the DISC
mecha (display as OOOOOO when there is no error)
DOOR ERROR: Displays the error code for error in the door
mecha (display as OOOOOO when there is no error)
*Immediately after moving to the RUNNING MODE, hide the dis-
play of all the above. Display the above items after an item is se-
lected.
[BACK] key: Goes back to the service mode *Only valid before
selecting an item. Not valid after a selection is made.
Mode Cancel Key
• DOOR MODE can be canceled using the EJECT hard key.
• DVD MODE can be canceled using the Power Off hard key.
(1) DOOR MODE
Execute Door mecha running mode 1.
(Not valid for models without door mecha.)
2th line display: DOOR MODE 1
3th line display: Display the number of runs in 6 digits.
4th line display: No display
5th line display: Display as "000000" when there is no door
mecha error, display the door mecha error code when an
error has occurred.
(2) DVD MODE 1 to DVD MODE 6
Execute DVD running mode 1 to 6.
(Refer to the following DVD mechanism running mode list.)
For models with door mecha, OPEN/CLOSE the door in
sync with DISC LOAD/EJECT.
2nd line display: DVD MODE 1-6
3rd line display: Display Arg 5,6,7 (BCD) of the Unit request
(running status) received from DISC module in 6 digits.
4th line display: Display Arg 2,3,4 (HEX) of the Unit request
(running status) received from DISC module in 6 digits.
5th line display: Display as "000000" when there is no door
mecha error, display the door mecha error code when an
error has occurred. (No display for models without door
mecha.)
(No.WA022<Rev.001>)26/36