(4) Remove the five screws A attaching the Top cover assembly.
(See Fig.3)
A
Fig.3
(5) From the bottom side, disconnect the connector wire from
Top cover assembly connected to connector
Front end board. (See Fig.4)
CN2
Fig.4
(6) From the bottom side, remove the spring from Traverse
mechanism assembly. (See Fig.5)
Fig.5
(7) From the top side, pull up the traverse mechanism and disengage
three dumper positions. (See Fig.6)
(same color spring)
A
3.2.2 Removing the Front end board (See Fig.7)
(1) Remove the Motor wires from loading motor soldered to
TP79
CN2
of the
(2) Remove the two screws B attaching the Front end board.
B
(No.WA022<Rev.001>)18/36
Dumper
(Different color spring)
Fig.6
and
TP81
of the Front end board.
TP81
TP79
Fig.7
Dumper
B