Yamaha MCR-730 Service Manual page 14

DRX-730/NX-E700
● Check the New ID Number (Device key)
Connection
Connect the VIDEO OUT terminal of this unit to the VIDEO IN terminal of the TV monitor with a video pin cable.
Operation Procedure
Perform following steps while watching the TV monitor screen and using the keys of this unit.
1. While pressing those 2 keys of this unit as indicated in the figure below, press the "STANDBY/ON" key to turn on
the power.
The self-diagnostic function is activated. (Fig. 3)
2. Press "
3. Press "
Wait about 15 seconds.
Self-diagnostic function starting display
V E R , A 3 4 S : D 2 E 1
4. New ID number (device key) will appear on the TV monitor screen as shown below.
Note: While the ID number (device key) is displayed, never operate any keys of the remote control.
5. To exit the self-diagnostic function, press "STANDBY/ON" key to turn off the power.
14
"STANDBY/ON" key
(Previous/Rewind)" key once to select main menu 11 DVD WRITE ID.
(Play/Pause)" key once to select sub-menu 11-2 DVD CLEAR ID.
Main menu 11 – DVD WRITE ID
D V D W R I T E I D
(Player's ID Number Setting)
ID Number ?
0 0 8 0 0 0 1 5 5
Compare
* * * * * * * * *
<CLEAR>
Input ID Number !
Turn on the power while pressing these keys.
Fig. 3
Fig. 4
Exit
Fig. 5
sub-menu 11-2 – DVD CLEAR ID
D V D C L E A R I D
New ID number (device key)
* The displayed "008000155" is an
example.