Miele HR 1421 Installation Instructions Manual page 9

Technical safety

Installation, repair and maintenance work should be performed by
a Miele authorized service technician in accordance with national
and local safety regulations and the provided installation
instructions. Contact Miele's Technical Service Department for
examination, repair or adjustment. Repairs and other work by
unauthorized persons could be dangerous and may void the
warranty.

Do not carry or lift the range by the oven door handle or the
control panel!

Check whether the anti-tip device is properly installed and locked
into place (see "Anti-tip device"):
– The anti-tip device must be fastened to the floor or wall with
suitable screws.
– You must be able to feel that the locking latch is engaged in the
bolt of the anti-tip device.

Slide the range's locking latch into place on the anti-tip device.
The locking latch must be noticeably engaged with the bolt of the
anti-tip bracket.

A damaged range can be dangerous. Always check for visible
signs of damage. Never use a damaged appliance.

Reliable and safe operation of the range can only be guaranteed if
it is connected to the public power supply.

The electrical safety of the range can only be guaranteed when it
is properly grounded. Compliance with this essential safety
requirement is absolutely mandatory. If in any doubt, please have the
building's wiring system inspected by a qualified electrician.

To avoid damaging the range, make sure that the connection data
(voltage and frequency) on the data plate correspond to the
building's power supply before connecting the appliance.
When in doubt, consult a qualified electrician.
IMPORTANT SAFETY INSTRUCTIONS
9