Download Print this page

Electrical Connection - Miele HR 1421 Installation Instructions Manual

30" electric, 30" induction range 30", 36" all gas range 30", 36", 48" dual fuel range
Hide thumbs

Advertisement

Electrical connection

ATTENTION:
During installation, maintenance and
repair work, the range must be
disconnected from the electrical
supply. It is only completely isolated
from the electrical supply if the plug
fuses have been fully unscrewed
(where applicable), the circuit breaker
has been tripped or the power cord
has been unplugged from the wall
outlet.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous and the
manufacturer will not be held
responsible.Installation, repair, and
maintenance work should only be
performed by a Miele-authorized
service technician. Work by
unqualified persons can cause
considerable danger to users. Miele
cannot be held liable for any damage
arising as a result of such work.
To avoid damaging the range, make
sure that the connection data
(voltage and frequency) on the data
plate correspond to the building's
power supply before connecting the
appliance.
When in doubt, consult a qualified
electrician.
104
The internal electrical wiring of the
appliance has been performed and
tested according to the valid
regulations. To guarantee
malfunction-free operation, ensure
the proper phase assignment of the
socket. In case of doubt, ask an
electrician.
The plug must be inserted into a
suitable outlet that has been installed
and grounded in compliance with all
applicable local regulations.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Installer: Please pass these
instructions on to the customer.

Advertisement

loading

  Related Manuals for Miele HR 1421