3. Screw Removal
Set the direction of rotation of the drill to the
anticlockwise direction. Insert the screw-bit into the
slot in the head of the screw. Hold the screw-bit
perpendicular to the head of the screw, otherwise
the screw or the screw head may be damaged.
Press the screw bit against the screw with a
constant pressure while removing the screw.
Maintenance and Cleaning
Attention! Always remove the battery before
carrying out any work on the machine. To clean,
always use a dry or moist, but not wet, towel. Many
cleaning agents contain chemical substances
which may cause damage to the plastic parts of
the machine. Therefore do not use any strong or
inflammable cleaners such as petrol, paint thinner,
turpentine or similar cleaning agents.
Always keep air ventilation holes free of dust
deposits to prevent overheating.
BLACK+DECKER batteries can be
recharged many times. At the end of their
useful like, discard batteries with due care
for our environment:
Run the battery down completely, and then
remove it from the tool.
NiCd, NiMH and Li-ion batteries are recyclable.
Take them to any authorised repair agent or a
local recycling station
No Load Speed
Level of sound pressure according to EN 60745:
Sound pressure (Lpa) 56.5 dB(A), uncertainty (K) 3
Acoustic pressure (Lwa) 67.5 dB(A), uncertainty (K)
Vibration total values (triax vector sum) according to
Ah 0.319 m/s2
0. . 26
1. 2 Ni-cd
1. 2 Ni-cd