Maintenance; Service Schedule - Kärcher BRC 40/22 C Operating Instructions Manual

Service Schedule

Check machine for cord damage
Check recovery dome and gasket for damage and cleanliness
Check brushes - should be clean with no lint or strings attached
Clean debris tray behind brush
Clean the underside of the brush deck area
Observe spray pattern
Inspect vacuum shoe for blockage; Remove and rinse any debris
Check hoses for wear, blockages, or damage
Check handles, switches, and knobs for damage
Run one gallon of water through solution system at end of day
Clean out recovery tank, clean float screen and check float ball to
make sure it moves freely
Clean out solution tank
Clean outside of all tanks and check for damage
Run vacuum motor for at least one minute to allow motor to dry
Store with recovery dome and solution lid removed to allow the tank
to dry
Remove bearing cap from end of brush. Clean bearing and cap.
Check all bearings for noise
Check all gaskets for wear and leakage
Check and clean solution screen
Check brush for wear; ensure bristles are not damaged
Check condition of vacuum shoe and frame for damage
Remove the bearing end cap off of the brush and clean
Check overall performance of machine
Clean debris from height adjust wheels
Check belts for wear and replace as necessary
Check cables for fraying
Check pump pressure; observe spray pattern and check with gauge
if necessary

MAINTENANCE

86417210 Operator's Manual - Armada BRC 40/22 C
Maintenance
DAILY WEEKLY
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
QUARTERLY
*
*
*
23