Water Filter - Bosch TES 501 Instruction Manual

Hide thumbs Also See for TES 501:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
en

Water filter

Using a water filter can prevent a build-up
of limescale deposits.
A new water filter must be rinsed before it
can be used. To do this, proceed as follows:
1� Press the water filter firmly into the empty
water tank with the aid of the measuring
spoon (18)�
2� Fill the water tank (16) with water up to
the max mark�
3� Turn the rotary
knob (13) to position
4. Press and hold buttons
A
(12) simultaneously for at least
5 seconds. Either
lights up.
5� Press the start button (10) to select "on".
6. Press and hold the start button (10) for
at least 5 seconds to confirm. All of the
LEDs light up briefly.
D
7. LED
flashes and LED
8� Place a container with a capacity of 0.5 l
under the milk frother outlet (6).
9� Pull out the milk frother (6) to open it.
F
LED
flashes.
10� Water will now flow through the filter and
rinse it.
F
11� When LED
lights up constantly,
press in the milk frother (6) to close it.
12� Empty the container.
The appliance is ready to use again.
8
B
(11) and
"off" or
"on"
F
lights up.
Information: Rinsing the filter simultane-
ously activates the setting for the change
filter display (= LED
The filter is no longer effective when the
change filter display appears, or at the
latest after two months. It needs to be
replaced for reasons of hygiene and so
that there is no build-up of limescale (this
could damage the appliance). Replacement
filters can be obtained from retailers or from
customer service (see "Accessories"). If no
new filter is inserted, change the setting for
the filter (see "Water hardness").
Information: You can use the filter indicator
to mark the month in which you inserted the
filter. You can also mark the month in which
you will need to replace the filter next
(at the latest after two months).
Information: If the appliance has not been
used for a prolonged period (for example,
when you are on vacation), the existing filter
should be rinsed before the appliance is
used again. To do so, dispense a cup of hot
water and pour it away.
D
flashes).

Advertisement

Table of Contents
loading

Table of Contents