Reconnect To Last Device; Pair The Srx-Sl Headset Using Near Field Communication (Nfc) - Honeywell SRX-SL User Manual

6. The Bluetooth radio attempts to connect with the headset.
7. When the headset and Android device are paired successfully, the device name appears under the Paired devices
heading on the Bluetooth screen.
8. When connected the headset's LED will flash blue to indicate it has pair successfully.

Reconnect to Last Device

To reconnect to the last HFP device, press and release the Power button after the SRX-SL headset has powered on.

Pair the SRX-SL Headset Using Near Field Communication (NFC)

Note: Not all Dolphin devices support NFC.
The SRX-SL enters pairing mode as soon as it is powered on.
If the SRX-SL headset is not connected, it powers off after 10 minutes in the disconnected state to preserve battery life.
If the USB cable is attached to charge the internal battery, the SRX-SL headset disconnects (if connected) and battery charging
begins.
Note: Some Android devices may automatically start the music application and start playing music when paired via NFC. This
can be prevented by disabling the music application on the Android device via Settings > Apps.
Dolphin 75e / Dolphin CT50 powered by Android 4.4 KitKat
1. Make sure the SRX-SL headset is on and is in pairing mode (the LED is solid green).
2. Touch All Apps
3. Return to the Home screen.
4. Touch All Apps
5. Under Wireless & Networks, touch More.
6. Touch the box next to NFC to enable (check) short-range wireless data exchange.
7. The location of the NFC tag in the headset eModule is under the Power button.
8. Hold the NFC tag on the eModule close to the back of the hand-held device. It may be necessary to move the eModule
up and down the back of the device to get the NFC tag close to the NFC radio in the handheld device.
9. When prompted, select Yes to pair the devices.
10. When the tag is recognized, the hand-held device emits a sound and the tag data is displayed on screen. If the sound
is muted, the hand-held-device vibrates when the NFC tag is detected.
2 - 4
> Settings . Verify the Bluetooth radio is activated
> Settings .
This prompt is only displayed the first time the devices pair.
.