Table of Contents
Advertisement
www.freeservicemanuals.info
DCR-TRV60/TRV60E/TRV70
2-15.NS-017 BOARD, SJ-019 BOARD AND JJ-001 BOARD, LASER UNIT
Caution
Hold the NS-017 board with
the NS holder as shown
during re-assembling.
NS holder
NS-017 board
Laser unit
Caution
Remove the claw of the NS
holder and pull out the
NS-017 board in the
direction of the arrow.
Guide (NS)
NS-017
board
NS holder
Attach the guide (NS) as shown
in the illustration.
Guide (NS)
Note that the FP-665 flexible
board is positioned under the
protrusion when it is re-assembled.
5 NS-017 board
Claw
assembly
Caution
Remove the three soldered
points from the FP-665 flexible
board and remove the laser unit.
SJ-019 board
Soldered point
Laser unit
Screw
qd
(M1.7 × 2.5),
lock ace, p2
ql Jack frame
Screw
qs
(M1.7 × 2.5),
o-no.+p2
qg Claw
Digitized in Heiloo Netherland
Caution
Protrusion
FP-665 flexible board
6 Tapping screw
(M1.7 × 5)
7 FP-663 flexible
board (8P)
FP-665 flexible
board (6P)
qk JJ-001 board
qf Claw
qj FP-661 flexible
board (8P)
2-16
Caution
Attach the protection sheet (SJ) as shown.
Protection sheet (SJ)
View from
View from
the side
the rear
8 Protection sheet (SJ)
9 SJ-019 board ,FP-665 board
3 FP-662 flexible
board (14P)
2 Two tapping
screws
(M1.7 × 5)
4 JJ-001 board assembly
1 FP-661 flexible
board (8P)
q; Two
screws
(M1.7 × 2.5),
lock ace, p2
qh FP-662 flexible
board (14P)
Screw
qa
(M1.7 × 2.5),
lock ace, p2
Advertisement
Table of Contents
