Table of Contents
Advertisement
01GB05C05.fm Page 18 Thursday, November 20, 2008 1:53 PM
8.1.3 Answer an external call
during intercom
During intercom, a new call tone is
emitted when there is an incoming
external call.
Press
to exit intercom mode.
Press
to pick up the external
call.
8.1.4 Switch between an internal
and external call
During the call, press
between an internal or external call.
8.2
Conference calling
The conference call feature allows an
external call to be shared with two
handsets (when used with the SE650/
655/658 base station), one handset and
the base (when used with the SE658 base
station). The three parties can share the
conversation and no network
subscription is required.
8.2.1 Establish a three-party
conference call
During the call, press
external call on hold (the caller can
no longer hear you).
• The display shows the numbers
of available handsets (and the
base station when used with the
SE658 base station).
Scroll
to the number of the unit
you wish to establish the conference
call with and press
18
Press
when using the SE658 base station)
to answer the internal call, where
both internal callers can talk.
• Intercom is established.
Press
press
the three party conference.
• Conference will be displayed on
to switch
to put the
Select.
Using the Intercom and Conference Calling
on the called handset (or
if the base station is called
Conf. soft key or long
on the first unit to start
the screen once the conference
call is established.
Advertisement
Table of Contents
