Emerson NGA2000 Reference Manual page 64

Reference Manual
748384-C
September 2003
AM_INPUT
Direction
Binding
Type
Value range
Units
Description
Usage
See also
AMBC
Direction
Binding
Type
Value range
Units
Description
Usage
See also
AMDELAYTIME
Direction
Binding
Type
Value range
Units
Description
Usage
See also
2-2 Analyzer Variables
Input
None
Enumerated
Analyzer specific: FID - LIGHT_FLAME; CLD- NOX_MODE, OZONATOR_ON; Not
present in NDIR or PMD modules.
None
Shows which functions can be controlled by an 1/0 Module's digital input
Used to select the operation of the 1/0 Module's digital input line. Its value appears
on the 1/0 Modules' menus that control this function.
ST1CONT
Bidirectional
AMBC
String
31 characters
None
Describes the analyzer physical configuration (e.g. bench type).
This is a descriptive variable. It should not be changed unless the analyzer hardware
is changed.
TAG
AMSN
GAS
Bidirectional
None
Float
0-30
Seconds
Delays the primary reading by this amount
Used to delay the output of one analyzer with respect to another, so as to cause their
responses to a gas change to be aligned in time. This is only useful for systems of
analyzers.
AFT90_
NGA2000 Reference
Rosemount Analytical Inc. A Division of Emerson Process Management