Emerson NGA2000 Reference Manual page 143

Rosemount
Hide thumbs Also See for NGA2000:
Table of Contents

Advertisement

NGA2000 Reference
IOVOLTS
Direction
Binding
Type
Value range
Units
Description
Usage
See also
IOVOLTSWAS
Direction
Binding
Type
Value range
Units
Description
Usage
See also
K0TAG
Direction
Binding
Type
Value range
Units
Description
Usage
See also
K1TAG
K1TAG, K2TAG, K3TAG, and K4TAG
Direction
Binding
Type
Value range
Units
Description
Usage
See also
Rosemount Analytical Inc.
A Division of Emerson Process Management
Output
None
3-element floating point array.
Nominal power supply values, plus or minus a volt or so.
Volts
The present value of the +15 V power supply.
The present value of the -15 V power supply.
The present value of the +5 V power supply.
The present power supply voltages. Of course you will be lucky to read this
variable if the third element is significantly different from 5V as it would stop the
Neuron chip from working: if it is different it probably indicates that the ADC or its
reference voltage is faulty.
IOVOLTSWAS
output
None
3-element floating point array.
Nominal power supply values, plus or minus a volt or so.
Volts
Stored values of the power supply voltage array IOVOLTS.
Stores the values of the power supply voltages at manufacturing check out time.
Compare the present values to this in order to see what has changed. Only write
into this if the electronic hardware has been changed. There is a special function
in the manufacturing data screen which automatically stores this and other such
variables.
IOVOLTS
Output
None
String
29 characters
None
SCAL only; module tag (as distinct from the subnode tags)
The tag for the base subnode. This has to be present for networking reasons.
K1TAG
Output
None
String
31 characters
None
SCAL only; subnode tags (as distinct from the module base tag)
The tags that select subnodes in the SCAL module. These are used to select
which subnode to bind to which analyzer. The tags are generated automatically
from the base tag in SUBNODE_BASE.
K0TAG
TAG
SUBNODE_BASE
Reference Manual
748384-C
September 2003
I/O Modules Variables
3-17

Advertisement

Table of Contents
loading

Table of Contents