Electrolux t4130 Service Manual page 39

Hide thumbs Also See for t4130:
Table of Contents

Advertisement

Service
manual
Outlet air - Overheating thermostat
Function
The outlet air overheating thermostat is located in the outlet air flow .
The overheating thermostat opens in event of overheating .
The thermostat opens automatically and has to be reset manually .
Resetting
Electric heated dryer, fig . 1 .
The overheating thermostat on the standard dryer is located behind the back plate of
the dryer at the bottom and on the right side of the dryer (A) . On the condense dryer it is
located on the flange at the rear side of the door opening (B) .
In order to reset the thermostat, shut of power and remove the back plate, see the
section "Disassembling the dryer" and press the reset button A or unscrew the two
screws on the flange and press the reset buttom B.
It is not necessary to disassemble the tumbler .
Error code
The following error code is related to this section .
E08
See Service Manual for Compass Control for more information .
1
Standard
A
Sensors and overheating thermostats
Condense
B
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T4130c

Table of Contents