Anviz OA1000 User Manual page 19

Include types of communication settings of the communications, real-time monitoring, access
to IP, the network interface type setting and parameters of the machine's network settings.
Settings steps as: [Comm mode] → [Internet] → [Ethernet] or [WIFI].
2.3.4.1 Comm Mode
This operation could set network communication mode. In [Network] menu, select [Comm
Mode] option and press [OK] key to enter [Comm Mode] interface:
[Comm Mode]: There are four types: server, client, RS232, RS485
[Server IP]: To communicate with the attendance of the computer IP address.
Note: Attendance set a variety of communications. See Chapter V of the communication
connection settings.
2.3.4.2 Internet
This operation could set WAN mode and DNS. In [Network] menu, select [Internet] option and
press [OK] key to enter [Internet] interface:
[WAN mode]: There are two types:
Ethernet
WIFI
Then set [DNS].
2.3.4.3 Ethernet
This operation could set Ethernet parameter according to local area network. In [Network]
menu, select [Ethernet] option and press [OK] key to enter [Ethernet] interface:
Connect the computer and attendance device with NET cable for communication
Connect the device with wireless network for communication
User Manual
18