Call Screening On Handset; Call Screening On Base - Philips CD645 User Manual

CD645.QXD 2/1/07
Press and
5
or Deactivate
Press to save the settings
6
6.6.4.3 How to remotely access your
answering machine
Place a call from your external phone to
1
your CD645
When the answering machine answers the
2
call and starts playing the outgoing message,
press to enter #
Enter the 4-digit remote access PIN
3
Note
If the PIN is correct, recorded messages would
be played back automatically.
However, if the PIN is incorrect, an error tone
would be heard, you can retry to enter the
remote access PIN again.
If retry PIN is still incorrect, the answering
machine will drop the line immediately.
If there are messages, all the new messages will
be played immediately and then old messages
will be played after a long beep.
Press the following keys to carry out the
4
desired function
Keys Description
1 Skip to the previous message
2 Play the message
3 Skip to the next message
6 Delete the playing message
7 Turn on the answering machine
8 Stop message playback
9 Turn off the answering machine
# Enter the remote access code if the
answering machine is on and outgoing
message is playing.
Note
If the answering machine is off, the phone will
enter into the remote access mode after 10
rings. User can then enter the 4-digit remote
access PIN (default is 0000) to activate the
remote access feature.
6.6.5

Call screening on Handset

If Call screening is set to On, when there is an
incoming message, you can press
call screening. If you decide to pick up the call,
Answering machine
10:18 AM Page 35
/ to select Activate
to start
press . Once the call has been picked up, the
recording will stop automatically.
Press to access the main menu
1
Press / to select Answer Machine
2
Press and /
3
Settings
Press and /
4
Press to select On or Off
5
Press to save the settings
6
Note
During call screening, user cannot stop the call
screening, only and
be used.
6.6.6

Call screening on Base

When the answering machine picks up the call,
call screening on base will be turned on if the
volume level is not at 00.You can press
to turn the base volume level to 00 to
turn off the call screening on base.
to select Ans.
to select Screening
/ on handset can
35