Table of Contents
Advertisement
The following steps may be useful to those users who would like to implement
their DeviceNet applications by using the command set.
1. Request the use of the Predefined Master/Slave Connection Set.
2. Apply
the
expected_packet_rate attribute of the I/O connection and make the I/O
Connection Object State established.
3. There are two ways to access I/O devices. One method is by the way
of the I/O connection object. Another is by using an explicit message
to set/get the IO attribute of application object.
4. Release the use of the Predefined Master/Slave Connection Set.
I-7242D DeviceNet/Modbus RTU Gateway User's Manual, July 2006, Version 1.1
Master's
Explicit
Request
Messages
I-7242D user manual
to
set
the
72/124
Advertisement
Table of Contents
