Table of Contents
Advertisement
Step 3: Select PC's COM port correctly. Then press the "Connect" button,
seconds to read the communication parameters stored in the
I-7242D's EEPROM.
Step 4: After read the parameters stored in I-7242D, these parameters will be
verified that they are correct or not. If any error has been detected,
the warning message will be pop-up as figure 6-18.
Figure 6-18. "EEPROM Data Error Dialog Box"
In this case, if any error has been detected, the default value will be
shown on each parameter setting field. If no error or warning message occurs,
the last setting value will be displayed on each parameter setting field.
Step 5: After reading parameters from EEPROM, a related information dialog
box will be displayed as figure 6-19.
I-7242D DeviceNet/Modbus RTU Gateway User's Manual, July 2006, Version 1.1
, to connect with the I-7242D. Then it would take few
Figure 6-19. "General Setting"
I-7242D user manual
62/124
Advertisement
Table of Contents
