Paging - Philips CD 240 User Manual

r
3
Press key on the called handset
to answer the internal call, where
both internal callers can talk.
• Intercom is established.
e
4
Press key on the first handset to
transfer the external call to the
called handset.
• The external call is transferred.
Note
If there is no answer from the called
i
handset, press
external call.
5.8.3 Answer an external call
during intercom
1
During intercom, a new call tone is
emitted when there is an incoming
external call.
r
2
Press to answer the external call
and end the intercom.
• The call is established.
Note
To put the internal call on hold, press
key to answer the incoming external call.
5.8.4 Switch between an internal
and external call
During the call, press and hold
to switch between an internal or external
call.
5.8.5 Establish a three-party
conference call
The conference call feature allows one
external call to be shared with two
24
key to resume the
*
handsets (in intercom). The three parties
can share the conversation and no
network subscription is required.
1
During the call, long press
to put the external call on hold (the
caller can no longer hear you).
•
INT 23456 *
representing the handset numbers
available for intercom
(
2
Enter the handset number (key
2
conference. To call all handsets at
once, press
3
Press
to answer the internal call, where
both internal callers can talk.
• Intercom is established.
4
Press and hold
seconds on the first handset to start
the three-party conference.
•
CONFERENCE
the screen once the conference call
is established.
i
5.9

Paging

The paging feature enables you to locate
a missing handset if the handset is in range
and contains charged batteries.
key
1
Press
• All the registered handsets start to
ring.
2
Once retrieved, press any key on the
handset to end the paging.
Note
If there are no key presses within 30
seconds, the handset and base station will
automatically return to idle mode.
is displayed,
represents all handsets).
*
6
- ) you wish to call for the
*
key.
r
key on the called handset
i
key for 2
will be displayed on
p
key on the base station.
Use more of your phone
i
key