Table Of Contents; Care And Maintenance - Honeywell 10288 Manual

TABLE OF CONTENTS

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . .2
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Mounting Bracket Installation . . . . . . . . . . . . . . . . . . .6
Standard or Angle Mounting Instructions . . . . . . . . . .7
Closemount Instructions . . . . . . . . . . . . . . . . . . . . . .10
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Canopy Installation . . . . . . . . . . . . . . . . . . . . . . . . . .12
Blade Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Light Kit Installation . . . . . . . . . . . . . . . . . . . . . . . . .14
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . .17
Replacement Parts List . . . . . . . . . . . . . . . . . . . . . .18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Limited Lifetime Warranty. . . . . . . . . . . . . . . . . . . . .20
ATTACH YOUR RECEIPT HERE
Serial Number
Purchase Date
WELCOME
PREPARATION
Before beginning the assembly of this product, ensure
that all parts are present. Compare all parts with the
package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to
assemble the product.
After opening the top of the carton, remove the
mounting hardware package from the foam inserts,
then remove the motor from the packaging and
place it on a soft surface, such as a carpet, to avoid
damage to the finish.
Estimated Assembly Time: Under 120 minutes
Tools Required for Assembly (not included): Electrical
Tape, Phillips Screwdriver, Pliers, Safety Glasses,
Step Ladder, and Wire Strippers
Helpful Tools (not included): AC Tester Light, Tape
Measure, Wiring Handbook, and Wire Cutters

CARE AND MAINTENANCE

At least twice each year, lower the canopy to check
the downrod assembly, and then tighten all screws
on the fan. Clean the motor housing with only a soft
brush or lint-free cloth to avoid scratching the finish.
Clean the blades with a lint-free cloth.
Important: Shut off the main power supply before you
begin any maintenance tasks. Do not use water or a
damp cloth to clean the ceiling fan.
FAN WEIGHT
The net weight of this fan is: 19.94 lbs. (9,04 kg).
2