HP ProDesk 405 G1 Microtower Maintenance And Service Manual page 132
Hide thumbs
Also See for ProDesk 405 G1 Microtower:
- Specification (51 pages) ,
- Disassembly instructions manual (16 pages) ,
- Hardware reference manual (49 pages)
Table of Contents
Advertisement
Control panel message
2230-General error during MEBx execution
2231-ME error during MEBx execution
2232-AMT error during MEBx execution
2233-HECI error during MEBx execution
2239-ME image lock failure
2240-ME image unlock failure
Invalid Electronic Serial Number
122
Chapter 8 POST error messages
Description
Error occurred during MEBx execution which
fails into the "General" grouping. Status
information displayed along with the error
provides further clarity into the failure. MEBx
handles transference of information between
the system BIOS and ME firmware.
Error occurred during MEBx execution which
fails into "ME" grouping.
Error occurred during MEBx execution which
fails into "AMT" grouping.
Error occurred during MEBx execution which
fails into "MEI or HECI" grouping.
Special system configurations with reduced
ME firmware image require BIOS control of
ME firmware upgrading. A failure has
occurred after the ME firmware update
process in which the BIOS could not relock
the ME firmware region.
Special system configurations with reduced
ME firmware image require BIOS control of
ME firmware upgrading. A failure has
occurred prior to the ME firmware update
process in which the BIOS could not unlock
the ME firmware region.
Electronic serial number is missing.
Recommended action
1.
Reboot the computer.
2.
If the error persists, update to the latest
BIOS version and ME firmware version.
3.
If the error still persists, replace the
system board.
1.
Reboot the computer.
2.
If the error persists, update to the latest
BIOS version and ME firmware version.
3.
If the error still persists, replace the
system board.
1.
Reboot the computer.
2.
If the error persists, update to the latest
BIOS version and ME firmware version.
3.
If the error still persists, replace the
system board.
1.
Reboot the computer.
2.
If the error persists, update to the latest
BIOS version and ME firmware version.
3.
If the error still persists, replace the
system board.
1.
Reboot the computer.
2.
If the error persists, update to the latest
BIOS version and ME firmware version.
3.
If the error still persists, replace the
system board.
1.
Reboot the computer.
2.
If the error persists, update to the latest
BIOS version and ME firmware version.
3.
If the error still persists, replace the
system board.
Enter the correct serial number in Computer
Setup.
Hide quick links:
Advertisement
Table of Contents
