GE Druck DPI 620 Safety And Quick Reference Manual page 8

A2 5.
6.
7.
8.
9.
10.
11.
12.
4.2 Key to figure B1 (MC 620 module carrier/PM 620 module) - Optional item
B1 1.
2.
3.
4.
5.
6
Parts
USB type A connector for connections to external peripherals
(USB flash memory or optional external modules).
USB mini-type B connector for communication with a
computer.
+5V DC power input socket. This supply also charges the
battery.
Sealed speaker unit.
Liquid crystal display (LCD): Colour display with touch-screen.
To make a selection, lightly tap on the applicable display area.
a. Battery indicator
CH1: Window for the channel 1 settings and values.
c. Measure or source
indication
e. Full scale (FS) range
Other windows: The number of windows you see on the display
is set by the number of task selections and external modules
you are working with (maximum: 6).
Tap this button to set up the Task, set up the instrument
(Configure) and to access Help (?). Refer to "Quick
Reference".
Tap this button to maximise each of the available windows in
sequence. Refer to "Quick Reference".
Pause (II) or Play ( ): Tap (II) to hold (freeze) all the data on
the display. To release the display and continue, tap ( ).
Pressure connection (G1/8 or 1/8NPT) to attach external
pressure equipment.
Pressure and electrical connections for a pressure module
(PM 620). These are self-seal pressure connections.
Two screws to attach the calibrator (DPI 620).
Electrical connections for the calibrator (DPI 620).
Pressure module (PM 620) with a pressure connection,
reference port (a) and a label. The label includes:
Pressure range. Example: 20 bar g (g: gauge; a: absolute);
serial number (S/N); manufacturer: name, address, website
b. Date and time
d. Function
f. Function units
K0454 Issue 1 - [EN] English