Symbols - Fluke 787 User Manual

Symbol
Risk of Danger. Important information. See

Manual.

AC (Alternating Current)

DC (Direct Current)
Alternating or direct current

Inspected and licensed by TÜV Product

Services
Meets Underwriters' Laboratories safety

requirements

Fuse
Conforms to CAN/CSA-C22.2 No 61010-1,

second edition, including Amendment 1.
Measurement Category II is applicable to test and measuring circuits connected directly to utilization
CAT II
points (socket outlets and similar points) of the low-voltage MAINS installation.
Measurement Category III is applicable to test and measuring circuits connected to the distribution part of
CAT III
the building's low-voltage MAINS installation.
Measurement Category IV is applicable to test and measuring circuits connected at the source of the
CAT IV
building's low-voltage MAINS installation.
This product complies with the WEEE Directive (2002/96/EC) marking requirements. The affixed label
indicates that you must not discard this electrical/electronic product in domestic household waste. Product

Category: With reference to the equipment types in the WEEE Directive Annex I, this product is classed
as category 9 "Monitoring and Control Instrumentation" product. Do not dispose of this product as
unsorted municipal waste. Go to Fluke's website for recycling information.
info@Fluke-Direct.com
Table 1. Symbols
Meaning
Fluke-Direct
Symbol

Earth ground

Conforms to European Union directives
Conforms to relevant North American

Safety Standards.
Battery


Hazardous voltage.
Conforms to relevant Australian EMC

requirements
Double Insulation

Conforms to relevant South Korean EMC

Standards.
.com
1.888.475.5235
ProcessMeter™
Safety Information
Meaning
5