Table of Contents
Advertisement
S
ETTING THE DRIVER DEVICE OPTIONS
This section explains how to ensure that your printer driver can utilize all of the hardware
features installed in your printer.
Accessories such as additional paper trays will only be usable if the printer driver on your
computer knows they are there.
In some cases the hardware configuration of your printer is automatically detected when
the driver is installed. However, it is advisable to at least check whether all of the available
hardware features are listed in the driver.
This procedure is essential if you subsequently add extra hardware features to your printer
after the drivers have been installed and set up.
Remember that if your machine is shared between users on different computers, the driver
must be adjusted on each user's machine.
W
INDOWS
1.
Access the driver's Properties window.
page
10.)
2.
Select the Device Options tab.
In the Windows XP PostScript driver the tab may be called "Device Settings".
3.
Set the options for any devices you have installed, including the correct number of
paper trays, high capacity feeder, duplex unit, etc.
4.
Click OK to close the window and save your changes.
M
OS X
AC
Snow Leopard (Mac OS X 10.6) and Leopard (Mac OS X 10.5)
1.
Open the Mac OS X Print & Fax Preferences.
2.
Ensure your machine is selected.
3.
Click Options & Supplies.
4.
Click Driver.
5.
Select all hardware options appropriate to your machine and click OK.
Tiger (Mac OS X 10.4)
1.
Open the Mac OS X Print & Fax Preferences.
2.
Ensure your machine is selected.
3.
Click Printer Setup....
4.
Click the menu and choose Installable Options....
5.
Select all hardware options appropriate to your machine and click Apply
Changes....
(See "Changing the driver defaults" on
Setting the driver device options > 12
Hide quick links:
Advertisement
Table of Contents
