Cisco SpeakerTrack 60 Installation Manual page 6

Telepresence
Hide thumbs Also See for SpeakerTrack 60:
Table of Contents

Advertisement

Option 2: Mount the camera in a recess
The recommendations for mounting the camera in a recess are the same as for mounting it
on the wall, with the following addition: If mounted in a recess, the sound from any participant
in the room must reach at least three of the four microphones on the microphone panel. To
achieve this, the recess should have slanted walls*.
SpeakerTrack 60 mounted in a recess above the monitor
The
bottom
wall of the recess is slanted 17°
The side walls of the recess are slanted 45°
The maximum depth of the recess is 218 mm (8.56 in). If less the camera will protrude
from the wall. Follow local building regulations and accessibility requirements.
SpeakerTrack 60 mounted in a recess below the monitor
The
upper
wall of the recess is slanted 17°
The side walls of the recess are slanted 45°
The maximum depth of the recess is 218 mm (8.56 in). If less the camera will protrude
from the wall. Follow local building regulations and accessibility requirements.
* CAD drawings with details and dimensions: http://www.cisco.com/go/telepresence/docs and
navigate to: Collaboration Endpoints > Collaboration Peripherals > TelePresence Peripherals >
TelePresence SpeakerTrack 60 > Technical References
82 cm (32.3 in)
82 cm (32.3 in)
32 cm
(12.6 in)
32 cm
(12.6 in)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents