Restoring Factory Settings; Updating Your Watch And App - Huawei FIT Manual

HUAWEI FIT UG_V1.0
HUAWEI FIT UG_V1.0
Backlight
mode
Off

4.4 Restoring factory settings

Use either of the following methods to restore factory settings on your watch.
M ethod 1: Swipe up or down on your watch screen, and select M ore
M ethod 2: Open the Huawei Wear app, touch Devices
Restore factory settings, and then touch OK.

4.5 Updating your watch and app

To improve your user experience, please update your watch and app when possible.
Updating your watch
Updating on your watch: If a new version is available, your watch will send a notification to
you. Follow the onscreen instructions to update your watch.
Updating in the app: Open the app, touch Devices
Firmware update > Check for updates. Your watch will automatically check for updates
and perform one if available.
Updating the app
iOS users: Update the app from the App Store.
Android users:
1.
2.
Issue 01 (2016-11-03)
Description
Your watch screen is turned off all the time.
Your watch is in automatic backlight mode by default.
After factory settings are restored on your watch, all the data on your watch, including the pairing
information, will be deleted, and you will need to pair your watch with your phone again.
You can perform an update on your watch only when it has more than 20% battery power.
Open the app, touch Home
Touch About > App update. If your phone displays Updating..., the app is being
updated.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
, select your device, touch
, select your device, and touch
, and touch your profile picture.
4 Settings
> Reset > .
34