AEG LB 4713 BT Manual page 50

English
50
Pause (1)
• Briefly press the button to pause playback.
• Press the button again to continue playback.
NOTE:
Depending on the device manufacturers, models, and software versions you need to
start the music playback in your player.
Adjust Volume (2/3)
Press the VOL+ (2) and
NOTE:
• If the maximum volume has been reached on the speaker, a beep will sound.
• Increase the volume on your player.
• The volume on the playback unit must not be set too low, otherwise static may occur.
• Music can still be heard on the lowest possible volume setting on the unit. This is not
a fault on the unit.
Select Music (2/3)
• Keep the VOL+ (4) button pressed to select the next track.
• Keep the VOL
▬
NOTE:
Your player must support this function.
Maintenance and Cleaning
CAUTION:
Never immerse the unit in water!
• There are no parts inside the device which can be maintained by the user.
• Clean the speaker with a slightly damp cloth without cleaning agent.
VOL (3) buttons to adjust the desired volume step by step.
▬
(9) button pressed to select the previous track.