Table of Contents
Advertisement
Available languages
Available languages
place with a little click. If you can see the red indicator (9)
on the upper side of the button, it is not locked completely.
Always install the battery cartridge fully until the red
indicator cannot be seen. If not, it may accidentally fall out
of the battery holder, causing injury to you or someone
around you.
Do not install the battery cartridge forcibly. If the cartridge
does not slide in easily, it is not being inserted correctly.
To remove the battery cartridge, slide it from the battery
holder while sliding the button (8) on the front of the
cartridge.
Attaching the battery holder to the heated
jacket (Fig. 4)
You can either place the battery holder in the battery
holder pocket or hang on the belt.
In case placing it in the pocket, connect the battery holder
and the power cable of the jacket and place it in the
battery holder pocket.
In case hanging it on the belt, firstly pass the jacket’s plug
through the hole inside the battery holder pocket, and
connect the battery holder and the power cable of the
jacket. And then hang the battery holder on your belt.
Connecting USB device (Fig. 5)
CAUTION:
• Connect only devices which are compatible with DC5V,
2.1A power source to the USB power supply port.
Otherwise it may cause malfunction to the battery
holder.
The battery holder (with the battery) can work as an
external power supply for USB device. Connect the USB
cable (not included) with the power supply port of the
battery holder. And then connect the other end of the
cable with the device. Turn on the switch next to the USB
port. The USB cable can be placed inside the jacket for
convenience by using the hole of the pocket and cable
holder.
NOTE:
• Before connecting USB device to the charger, always
backup your data of USB device. Otherwise your data
may lose by any possibility.
• The charger may not supply power to some USB
devices.
• The battery power is consumed while the switch next to
the USB port is turned on. Always turn off the switch
when not in use.
MAINTENANCE
CAUTION:
Never use gasoline, benzine, thinner, alcohol or the like.
Discoloration, deformation or cracks may result.
CAUTION:
Always be sure that the jacket is switched off and the
battery cartridge is removed before attempting to perform
inspection or maintenance.
If jacket does not switch on or any fault is found with a
fully charged battery cartridge, clean the terminals of the
battery holder and the battery cartridge. If jacket still does
not work properly, stop using the jacket and contact our
authorized service center.
OPTIONAL ACCESSORIES
CAUTION:
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
package as standard accessories. They may differ from
country to country.
Page 5
Advertisement
Table of Contents
