Replacing the External Parts
(2)
(1)
(3)
(7)
(7)
(8)
(14)
(13)
(4)
(5)
(6)
(10)
(15)
(1 1)
(1 1)
(12)
To remove:
(4)
1. Face Plate
Remove the setscrew (1) and washer (2). Re-
move the face plate (3).
2. Top Cover
Remove the 2 setscrews (4).
Lift the top cover (5) and pull out the motor
connector (6). Remove the top cover.
3. Belt Cover
Remove the 3 setscrews (7) and remove the belt
cover (8).
NOTE:
When attaching the belt cover, engage the hooks
with the motor cover.
(9)
4. Motor Cover
Remove the 3 setscrews (9) and remove the
motor cover (10).
(9)
5. Base
Remove the 4 hinge screws (11), washers (12),
rubber feet (13) and base washers (14). Remove
the base (15).
(1 1)
To attach:
Follow the above procedures in reverse.
(1 1)
1