Removing The Base Cover; Procedure - Dell XPS 13 Service Manual

Removing the base cover

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Remove the eight screws (M2x3) that secure the base cover to the palm-rest
assembly.
2 Using your fingertips, open the system badge.
3 Remove the screw (M1.6x4) under the system badge that secures the base
cover to the palm-rest assembly.
computer. After working inside your computer, follow
After working inside your computer. For more safety best
www.dell.com/
Before
11