Slide the chassis into the cabinet. Install
the cabinet seal (accessory part) be-
tween the cabinet and the frame/wall.
Cabinet seal
k Reinstall the shipping bracket and attach
Y
with screws (2).
9. Reconnect the green and yellow
grounding wire.
Electrical
Shock Hazard
Connect ground wire when unit is in
cabinet.
Failure to do so will result in electrical
shock.
;i Remove slide-out filter from front panel.
Replace the front panel. Inset-t tabs into
slots on the top flange of the cabinet.
Rotate the front panel downward until it
fits snugly between cabinet side
flanges. Secure front panel with 2
screws (accessory parts). Replace
slide-out air filter.
F- 'UT
Make sure the Exhaust Door
Control lever is between the frame and
the first air discharge louver before
securing front panel with screws.
15