Download  Print this page

Advertisement

QQ
3 7 63 1515 0
Indicators on the display
Name
Function
SW
Lights up when subwoofer
is connected and the audio
signal is output from the
SUBWOOFER jack. While
this indicator lights up, the
receiver creates a
subwoofer signal based on
the L.F.E. signal in the disc
being played back or the
low frequency components
of the front channels.
Playback
The letters (L, C, R, etc.)
channel
indicate the channels being
indicators
played back. The boxes
TE
L 13942296513
around the letters vary to
show how the receiver
downmixes the source
sound (based on the speaker
settings).
L
Front Left
R
Front Right
C
Center (monaural)
SL
Surround Left
SR
Surround Right
S
Surround (monaural or the
surround components
obtained by Pro Logic
processing)
SBL
Surround Back Left
SBR
Surround Back Right
SB
Surround Back (the
surround back components
obtained by 6.1 channel
decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: Surround
speakers are set to "NO."
Sound Field: A.F.D. AUTO
SW
L
SL
www
.
http://www.xiaoyu163.com
Name
Function
Input
Light up to indicate the
indicators
current input.
INPUT
Lights up constantly with
either following the
corresponding indicators
that indicate the current
input status.
HDMI
The receiver recognizes a
component connected via
an HDMI IN jack.
DMPORT
The DIGITAL MEDIA
PORT adapter is connected
and "DMPORT" is
selected.
MULTI IN
The multi-channel input is
selected.
NETWORK The input of the network
function (Server/
SHOUTcast/Rhapsody) is
selected.
AUTO
Lights up with the
corresponding indicators
that indicate the current
input when INPUT MODE
is set to "Auto."
COAX
Digital signal is input
through the COAXIAL
jack.
OPT
Digital signal is input
through the OPTICAL jack.
ANALOG
No digital signal is being
input. When INPUT
MODE is set to "Analog,"
or when the "2ch Analog
Direct" is being selected, it
also lights up.
EQ
Lights up when the
equalizer is activated.
HDMI A B
Lights up when the signals
are output from the HDMI
OUT A or B jack.
C
R
SR
D.C.A.C.
Lights up when auto
calibration is activated.
ZONE 2/
Lights up while operation in
ZONE 3
zone 2/zone 3 is being
enabled.
SLEEP
Lights up when the sleep
timer is activated.
x
ao
y
i
http://www.xiaoyu163.com
8
Name
Function
L.F.E.
Lights up when the disc
being played back contains
an L.F.E. (Low Frequency
Effects) channel and the
L.F.E. channel signal is
actually being reproduced,
the bars underneath the
letters light up to indicate
the level. Since the L.F.E.
signal is not recorded in all
parts of the input signal the
bar indication will fluctuate
(and may turn off) during
playback.
Q Q
3
6 7
1 3
Tuning
Lights up when the receiver
indicators
tunes in radio stations, or
satellite radio stations.
STEREO
Stereo broadcast
MONO
Monaural broadcast
XM
The XM Mini Tuner and
Home Dock are connected
and "XM" is selected.
SIRIUS
The SiriusConnect Home
tuner is connected and
"SIRIUS" is selected.
CAT
The category mode is
selected during the satellite
radio operation.
PRESET
The tuning mode is set to
the preset mode.
MEMORY
A memory function, such as
Name Input, etc., is
activated.
H.A.T.S.
Lights up when the
H.A.T.S. (High quality
digital Audio Transmission
System) function is
activated.
BI-AMP
Lights up when surround
back speakers selection is
set to "BI-AMP."
D.RANGE
Lights up when dynamic
range compression is
activated.
VOLUME
Displays the current
volume.
Dolby
Lights up one of the
Digital
respective indicators when
Surround
the receiver is decoding the
indicators
corresponding Dolby
Digital format signals.
u163
D
Dolby Digital
D+
Dolby Digital Plus
.
D EX
Dolby Digital Surround EX
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to "Analog."
STR-DA6400ES
2 9
9 4
2 8
Name
DTS-HD
indicators
DTS-HD
MSTR
LBR
HI RES
TrueHD
1 5
0 5
8
2 9
9 4
L-PCM
Dolby
Pro Logic
indicators
PL
PLII
PLIIx
DTS(-ES)
indicators
DTS
96/24
NEO:6
DTS-ES
DISCRETE DTS-ES Discrete 6.1
MATRIX
m
co
DSD
Neural-THX Lights up when the receiver
9 9
Function
Light up when the receiver
is decoding DTS-HD.
Lights up constantly with
the one of the following
indicators.
DTS-HD Master Audio
DTS-HD Low Bit Rate
Audio
DTS-HD High Resolution
Audio
Lights up when the receiver
is decoding Dolby TrueHD.
2 8
9 9
Lights up when Linear
PCM (Pulse Code
Modulation) signals are
input.
Lights up one of the
respective indictors when
the receiver applies Dolby
Pro Logic processing to 2
channel signals in order to
output the center and
surround channel signals.
Dolby Pro Logic
Dolby Pro Logic II
Dolby Pro Logic IIx
Note
This indicator does not light
when either the center speaker
and surround speaker is not
connected.
Light up when DTS or
DTS-ES signals are input.
Lights up when the receiver
is decoding DTS signals.
Either 96/24 or NEO:6 also
lights up depending on the
input signal format or
decoding format.
DTS 96/24 (96 kHz/24 bit)
decoding
DTS Neo:6 Cinema/Music
Lights up with the either
following indicator
depending on the input
signal decoding format.
DTS-ES Matrix 6.1
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is not set to
"Analog."
Lights up when the receiver
is receiving DSD (Direct
Stream Digital) signals.
applies Neural-THX
processing to input signals.
11

Advertisement

Table of Contents

   Related Manuals for Sony STR-DA6400ES

Comments to this Manuals

Symbols: 0
Latest comments: